Configuration of Radsecproxy with f-ticks

  1. Download package radsecproxy and nettle library from internet.
  2. Extract these tar files by using
    # tar -xvf radsecproxy-1.6.5.tar.gz
    # tar -xvf nettle-2.7.1.tar.gz
  3. Move into nettle folder by using
    # cd nettle-2.7.1
  4. Install gcc compiler which is nettle’s prerequisite
    # yum install *gcc*
  5. Install Nettle by running the following commands:
    #./configure –prefix=/usr && make
  6. To test the results, issue:
    # make check
  7. Now, as the root user:
    # make install
  8. Now,Move into radsecproxy folder
    # cd radsecproxy-1.6.5
  9. Now,Type the command
    #./configure –enable-fticks
    # make
    # make check
    # make install
  10. Put radsecproxy configuration file in /usr/local/etc/ folder
    # cp radsecproxy.conf /usr/local/etc/
  11. Start the radsecproxy by using command
    # radsecproxy
  12. Install apache server
    # yum install httpd*
  13. Open file httpd.conf.
    # vim /etc/httpd/conf/httpd.conf
  14. Uncomment NameVirtualHost and put the IP of server by replacing * such as NameVirtualHost IP-OF-THE-MACHINE:80
  15. In VirtualHost,Edit
    <VirtualHost IP-OF-THE-MACHINE:80>
    ServerAdmin root@ IP-OF-THE-MACHINE
    DocumentRoot /radsecproxy-1.6.5/
    ServerName IP-OF-THE-MACHINE
    </VirtualHost>
  16. Check it in browser by http:// IP-OF-THE-MACHINE/f-ticks

Leave a Reply